| Model | Rated Capacity (Kgs) | Spring Constant (Kg/mm) | Spring Color | Operating Height (H) | Dimension (MM) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| (Kgs) | (Lbs) | A | B | C | D | E | F | G | H | ||||||
| PTM-D-151M | 150 | 330 | 6 | ORANGE | 170 | 172 | 121 | 137 | 86 | 16 | 30 | 88 | 14 | ||
| PTM-D-201M | 200 | 440 | 8 | PURPLE (PINK) | |||||||||||
| PTM-D-301M | 300 | 860 | 12 | RED | |||||||||||
| PTM-D-451M | 450 | 990 | 18 | GREEN | |||||||||||
| PTM-D-601M | 600 | 1320 | 24 | SILVER | |||||||||||
| PTM-D-826M | 825 | 1815 | 33 | BROWN | |||||||||||
| PTM-D-976M | 975 | 2145 | 39 | BROWN+WHITE | |||||||||||
| PTM-D-1101M | 1100 | 2425 | 44 | BLUE | |||||||||||
| PTM-D-1251M | 1250 | 2750 | 50 | BLUE+WHITE | |||||||||||
| PTM-D-1401M | 1400 | 3080 | 56 | BLUE+BROWN | |||||||||||
| PTM-D-602M | 600 | 1320 | 24 | RED | 170 | 180 | 200 | 156 | 156 | 20 | 40 | 118 | 18 | ||
| PTM-D-902M | 900 | 1980 | 36 | GREEN | |||||||||||
| PTM-D-1020M | 1200 | 2640 | 48 | SILVER | |||||||||||
| PTM-D-1652M | 1650 | 3630 | 66 | BROWN | |||||||||||
| PTM-D-1952M | 1950 | 4290 | 78 | BROWN-WHITE | |||||||||||
| PTM-D-2202M | 2200 | 4840 | 88 | BLUE | |||||||||||
| PTM-D-2502M | 2500 | 5500 | 100 | BLUE+WHITE | |||||||||||
| PTM-D-2802M | 2800 | 6160 | 112 | BLUE+BROWN | |||||||||||
| PTM-D-3304M | 3300 | 7260 | 132 | BROWN | 180 | 255 | 167 | 211 | 123 | 20 | 48.5 | 135 | 18 | ||
| PTM-D-3904M | 3900 | 8580 | 156 | BROWN+WHITE | |||||||||||
| PTM-D-4404M | 4400 | 9680 | 176 | BLUE | |||||||||||
| PTM-D-5004M | 5000 | 11000 | 200 | BLUE+WHITE | |||||||||||
| PTM-D-5604M | 5600 | 12320 | 224 | BLUE+BROWN | |||||||||||
PTM-D
Specification
Vibration isolators for equipment which is subject to load vibrations and large external or torquing forces shall consist of laterally stable steel springs assembled into a welded steel housing assembly designed to limit vertical movement of the supported equipment.
Housing assembly shall be of fabricated steel members and consist of a load transfer plate at the top complete with tapped holes, adjusting and leveling bolts, vertical restraints,
isolation washers and a bottom plate with non-skid noise isolation pad and holes provided for anchoring to supporting structure.
Spring elements shall have a outside diameter not less than 0.8 times to the compressed height of the spring rated load. All springs shall be designed to provide a minimum of 50% overload capacity.
Vibration isolators shall be Model PTM-D, as manufactured by Tozen Sangyo Co.,Ltd.
Download
For a comprehensive overview of the product specifications mentioned above, feel free to download the product catalog here.
Description
TOZEN PTM-D series vibration isolators consist of free standing laterally stable steel springs assembled into ductile iron housing assemblies fabricated to limit vertical movement of the isolated equipments when if equipment loads are reduced or if the equipments are subjected to large external forces. Spring elements are complete with an internal adjusting and leveling bolt. Holes are provided at the upper plate for bolting to supported equipment. A 10mm thick non-skid noise absorbing rubber pad is bonded at the bottom plate with holes for bolting to the structure. All the spring elements are comply to JIS 2704 for semi-permanent use. To assure lateral stability, outside diameter of the spring elements do not less than 0.8 times of the compressed height of the spring at rated load. All the spring are designed to provide a minimum of 50% overload capacity.
PTM-D series vibration isolator are shipped with standard deflections of 25 and 50 mm, and available up to 50mm, with load capacities from 450 Kgs to 5,600 Kgs. Model PTM-D spring isolators are recommended for the isolation of vibration produced by equipment carrying a large fluid load which may be drained, such as boilers and chillers, and for the isolation of cooling towers, air cooled condensers, etc, where motion due to wind loads must be minimized.
Application
Model PTM-D mounts are typically used to reduce the transmission of noise and vibration into supporting structures from equipments carrying a large fluid load that may be drained, such as boilers and for cooling towers, which also require hold down for wind loads.
